Noise Suppressor: Installation
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the noise suppressor assembly.
Tightening torque:
12±3 N.m (1.2±0.3 kgf-m, 8.9±2.2 ft-lb)
- Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .