LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Entertainment System) >> Camera >> Removal >> Rear >> Rearview Camera Assembly

Rearview Camera Assembly

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>REMOVAL .
  3. Remove the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>REMOVAL .
  4. Remove the rearview camera assembly.
    CAUTION: Do not drop or apply any impact to the rearview camera assembly because it is a precision equipment.
    1. Disconnect the connector.
    2. Disconnect the claws and then remove the rearview camera assembly.
G13865747Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals