LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Entertainment System) >> Audio System >> Operation >> Check Connections With Line Diag Mode

Check Connections With Line Diag Mode

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to ACC.
  2. Press the button (b) twice with the button (a) pressed.
    G13865687Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Pressing the button (a) for 3 seconds or more, or turning the ignition switch from the OFF to ACC position can exit the diagnostic mode.
  3. {Line Diag} screen is displayed.
  4. Check the connection status with the {Connection} in the {Line Diag} screen.
G13865688Courtesy of SUBARU OF AMERICA, INC.
Item Contents Inspection
GPS GPS antenna connection Check that the display shows OK. (Models with GPS antenna only)
MIC MIC connection Check that the display shows OK.
Rr_CAM Rr CAM Video signal Check that the display shows OK.
AUX AUX connection Connect the pin jack for check into the AUX terminal, and check that the display shows OK.
USB1 USB connection Connect the memory for check into the USB terminal, and check that the display shows OK.
USB2 USB connection (DCM) Connect the memory for check into the USB terminal, and check that the display shows OK.
SXM SXM connection Check that the display shows OK.
CAN CAN connection Check that the display shows OK.
Leather AMP HK amplifier connection Check that the display shows OK.
scientia non olet · About LEMON Manuals