LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Airbag System) >> Inspection Locations after a Collision >> Inspection >> Knee Airbag Module

Knee Airbag Module

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Frontal collision (knee airbag module activated)
    1. Replace the following parts with new ones.
      • Airbag control module
      • Driver's airbag module
      • Knee airbag module
      • Passenger's airbag module (if deployed)
      • Curtain airbag module (right and left/if deployed)
      • Front seat belt pretensioner & adaptive force limiter (right and left)
      • Lap seat belt pretensioner (right and left)
      • Locking tongue (front seat) (right and left)
      • Second row seat belt pretensioner (right and left outer sides)
      • Front impact sensor (right and left)
      • Instrument panel assembly (because it is integrated with passenger's airbag module) (if passenger's airbag module is deployed)
      • Steering wheel
      • Column assembly steering
      • Steering roll connector
    2. Visually inspect the following items and replace any damaged part with a new one.
    • Side airbag module
    • Side impact sensor (center pillar)
    • Cover front seat backrest
    • Seat pad assembly backrest
    • Seat frame assembly backrest
    • Seat frame assembly cushion
    • Passenger's seat position sensor
    • Universal joint LWR
    • Universal joint UPR
    • Steering gearbox
    • Beam COMPL steering
    • Passenger's seat occupant detection system (Perform the inspection following the diagnostic procedure in the "OCCUPANT DETECTION (DIAGNOSTICS)" information.) Ref. to OCCUPANT DETECTION (DIAGNOSTICS)>Basic Diagnostic Procedure>PROCEDURE .
    • Harnesses and connectors on body side that are linked to the replaced parts
  2. Frontal collision (knee airbag module not activated)

    Visually inspect the following items and replace any damaged or cracked part with a new one.

    Specially inspect the damage of airbag module body, mounting bracket and harness connector.

    • Driver's airbag module
    • Knee airbag module
    • Passenger's airbag module
    • Front seat belt pretensioner & adaptive force limiter (right and left)
    • Lap seat belt pretensioner (right and left)
    • Locking tongue (front seat) (right and left)
    • Passenger's seat position sensor
    • Second row seat belt pretensioner (right and left outer sides)
    • Front impact sensor (right and left)
    • Instrument panel assembly (because it is integrated with passenger's airbag module)
    • Passenger's seat occupant detection system (Perform the inspection following the diagnostic procedure in the "OCCUPANT DETECTION (DIAGNOSTICS)" information.) Ref. to OCCUPANT DETECTION (DIAGNOSTICS)>Basic Diagnostic Procedure>PROCEDURE .
  3. No frontal collision