Front Brake Pipe

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the brake pipe.
1. Install the pipe assembly front ABS to the clamp and clip.
2. Install the pipe assembly front ABS using a flare nut wrench.
  Preparation tool:
  
  Flare nut wrench
  
  Tightening torque:
  
  Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to BRAKE>General Description>COMPONENT>FRONT BRAKE PIPES AND HOSES .
Install the vacuum booster assembly. Ref. to BRAKE>Brake Booster>INSTALLATION> BRAKE BOOSTER .
Install the front wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .