Transfer Reduction Driven Gear: Disassembly
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Using the ST1, ST2, ST3 and a press, remove the ball bearing (large) from the transfer reduction driven gear.
Preparation tool:
ST1: REMOVER (899864100)
ST2: SEAT (398497701)
ST3: REMOVER (498077600)
- Using the ST1, ST2, ST3 and a press, remove the ball bearing (small) from the transfer reduction driven gear.
Preparation tool:
ST1: REMOVER (899864100)
ST2: SEAT (398497701)
ST3: REMOVER (18720AA000)