LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> Ascent Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (CVT Transaxle System) >> Transfer Reduction Driven Gear >> Assembly

Transfer Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new ball bearing (large) to transfer reduction driven gear using the ST.
    CAUTION:
    • Before press-fitting the ball bearing, apply CVTF to press-fitting surface.
    • Use SUBARU genuine CVTF.
    NOTE: Install to the splines inside transfer reduction driven gear.

    Preparation tool: 

    ST: BUSHING 1-2 INSTALLER (499277100)

    G12452371Courtesy of SUBARU OF AMERICA, INC.
  2. Install the new ball bearing (small) to transfer reduction driven gear using the ST.
    CAUTION:
    • Before press-fitting the ball bearing, apply CVTF to press-fitting surface.
    • Use SUBARU genuine CVTF.

    Preparation tool: 

    ST: BUSHING 1-2 INSTALLER (499277100)

    G12452371Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals