Front Reduction Drive Gear: Disassembly
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the seal ring and O-ring.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Using the ST, remove the ball bearing from front reduction drive gear.
Preparation tool:
ST: REMOVER (899864100)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Using the ST, remove the ball bearing from front reduction drive gear.
Preparation tool:
ST: REMOVER (498077000)
 Courtesy of SUBARU OF AMERICA, INC.
|