Inspection Mode 8
| Code | Description & trouble part | Note |
|---|---|---|
| B2B20 | Passenger's Door Power Window Auto Switch Stuck | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Window (Passenger)]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Window (Passenger)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step repeat from step 1 ).
- Using the passenger's side power window switch, operate the automatic up/down feature and check that the window rolls up and down.
- Using the Subaru Select Monitor, read the DTC of [Power Window (Passenger)] to check that there is no DTC displayed. Ref. to POWER WINDOW (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.