LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX STI >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle & Differential (TY856) >> Transfer Driven Gear >> Installation

Transfer Driven Gear: Installation

  1. Install the transfer driven gear.
    CAUTION: Apply transmission gear oil onto sliding or revolving surfaces before installation.
  2. When the taper roller bearing or the transfer driven gear is replaced, select an appropriate adjusting washer for the transfer driven gear. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>EXTENSION CASE>ADJUSTMENT .
  3. Install the extension case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>EXTENSION CASE>INSTALLATION .
  4. Install the manual transmission assembly to the vehicle. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION .
scientia non olet · About LEMON Manuals