Reset Operation A
- Sit in the driver's seat and close the door.
- Turn the ignition switch to ON.
- Operate the switch - power window main to open the glass assembly - front door halfway.
- Operate the switch - power window main in "UP" direction to fully close the glass assembly - front door on the driver's side.
- While the glass assembly - front door is fully closed, hold down the switch - power window main in "UP" direction for one second.
- Operate the switch - power window main in "AUTO DOWN" direction to check whether the window fully opens properly.
NOTE:
If the window does not fully open properly, repeat steps 1 to 6.