Rear Shock Absorber: Disposal
CAUTION:
- Before discarding the strut COMPL and the shock absorber COMPL, be sure to wear goggles to protect eyes from gas, oil and cutting powder.
- Do not disassemble the strut COMPL and the shock absorber COMPL or throw them into flames.
- When discarding the strut COMPL and the shock absorber COMPL filled with gas, drill a hole on them to purge the gas.
- Place the shock absorber on a level surface with the piston rod fully expanded.
- Make a hole into the specified position 30 mm (1.18 in) deep using a drill with 2 - 3 mm (0.08 - 0.12 in) diameter.