Rear Shock Absorber: Disassembly

Using a coil spring compressor, compress the coil spring.
Using a hexagon wrench to prevent the shock absorber piston rod from turning, remove the self-locking nut with ST.
CAUTION: When installing the coil spring compressor to the coil spring, follow the operation manual accompanied with the coil spring compressor during operation.

Preparation tool:

ST: STRUT MOUNT SOCKET (20399FG000)

NOTE: <Example of coil spring compressor installation>
The installing position of coil spring compressor varies depending on the coil spring shape and winding number.

Courtesy of SUBARU OF AMERICA, INC.
Remove the rubber seat - shock UPR and shock mount - rear from the shock absorber COMPL - rear.
Gradually decrease the compression pressure of compressor, and remove the coil spring - rear.
Remove the helper - rear and the dust cover - rear shock.