LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) >> Front Sub Sensor >> Removal

Front Sub Sensor: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  3. Remove the bumper face - front and the bumper beam COMPL - front. Refer to EXTERIOR/INTERIOR TRIM>FRONT BUMPER>REMOVAL .
  4. Remove the bolt, and then detach the front sub sensor. Refer to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>FRONT SUB SENSOR .
    G10298341Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals