Inspection Mode 1
| DTC | Item | Note |
|---|---|---|
| B1430 | IN-VEHICLE (POST EVAPORATOR) TEMPERATURE SENSOR CIRCUIT OPEN | - |
| B1431 | IN-VEHICLE (POST EVAPORATOR) TEMPERATURE SENSOR CIRCUIT SHORT-CIRCUIT | - |
| B1432 | AMBIENT TEMPERATURE SENSOR CIRCUIT OPEN (AIR-CONDITIONER) | - |
| B1433 | AMBIENT TEMPERATURE SENSOR CIRCUIT SHORT-CIRCUIT (AIR-CONDITIONER) | - |
| B1434 | EVAPORATOR TEMPERATURE SENSOR CIRCUIT OPEN | - |
| B1435 | EVAPORATOR TEMPERATURE SENSOR CIRCUIT SHORT-CIRCUIT | - |
| B14E1 | AIR MIX DOOR ACTUATOR STEPPING MOTOR CIRCUIT OPEN (DRIVER) | - |
| B14E2 | AIR MIX DOOR ACTUATOR STEPPING MOTOR CIRCUIT SHORT-CIRCUIT (DRIVER) | - |
| B14E3 | AIR MIX DOOR ACTUATOR STEPPING MOTOR CIRCUIT OPEN (PASSENGER) | - |
| B14E4 | AIR MIX DOOR ACTUATOR STEPPING MOTOR CIRCUIT SHORT-CIRCUIT (PASSENGER) | - |
| B14E5 | MODE DOOR ACTUATOR STEPPING MOTOR CIRCUIT OPEN | - |
| B14E6 | MODE DOOR ACTUATOR STEPPING MOTOR CIRCUIT SHORT-CIRCUIT | - |
| B14E9 | INTAKE DOOR ACTUATOR CIRCUIT OPEN | - |
| B14EA | INTAKE DOOR ACTUATOR CIRCUIT SHORT-CIRCUIT | - |
| B14EB | INTAKE DOOR ACTUATOR STUCK | - |
| U0073 | CONTROL MODULE COMMUNICATION BUS OFF | - |
| U0100 | LOST COMMUNICATION WITH ECM/PCM "A" | - |
| U0101 | LOST COMMUNICATION WITH TCM | - |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | - |
| U0140 | LOST COMMUNICATION WITH BODY CONTROL MODULE | - |
| U0155 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE | - |
| U0401 | INVALID DATA RECEIVED FROM ECM/PCM "A" | - |
| U0402 | INVALID DATA RECEIVED FROM TCM | - |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | - |
| U0422 | INVALID DATA RECEIVED FROM BODY CONTROL MODULE | - |
| U0423 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. Refer to HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS)>CLEAR MEMORY MODE .
- Read the DTC and check that the DTC is not displayed. Refer to HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS)>READ DIAGNOSTIC TROUBLE CODE (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1.
- Turn the ignition switch to ON and then leave it for 16 seconds or more.
- Read the DTC and check that the DTC is not displayed.
NOTE:
If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.