LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Continuously Variable Transmission (Diagnostics)) >> Drive Cycle >> Procedure >> Drive Cycle F

Drive Cycle F

WARNING: This page is about a different variant/trim than selected.
Unit of measure Item Condition
P0705 Transmission Range Sensor "A" Circuit (PRNDL Input) -

Diagnostic procedure: 

  1. Start the engine.
  2. Depress the brake pedal and move the select lever to each range at an interval of five seconds.
    NOTE: Move the select lever in the following order: "P" → "R" → "N" → "D".
  3. Maintain the engine speed to 2, 000 rpm for five seconds or more.
scientia non olet · About LEMON Manuals