Differential Side Retainer
WARNING: This page is about a different variant/trim than selected.
- Remove the O-rings.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the oil seal.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the claw of ST1, and attach the claw of ST2.
ST1 398527700 PULLER ASSY
ST2 18760AA000 CLAW
 Courtesy of SUBARU OF AMERICA, INC.
|
- Using the ST, remove the taper roller bearing outer race.
ST1 398527700 PULLER ASSY
ST2 18760AA000 CLAW
 Courtesy of SUBARU OF AMERICA, INC.
|