LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Window Glass & Mirrors) >> Outer Mirror Assembly >> Assembly

Outer Mirror Assembly: Assembly

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Be careful not to catch the harness in between the parts. 

  1. Install the cover mirror body.
  2. Connect the connector, and install the light assembly side turn mirror. (Model with side turn signal light)
  3. Install the Blind Spot Detection/Rear Cross Traffic Alert system indicator and connect the connector. (Model with Blind Spot Detection/Rear Cross Traffic Alert system)
  4. Install the cover cap outer mirror LWR.
  5. Install the cover cap outer mirror.
  6. Install the mirror repair.
    NOTE:

    Make sure that the connector and clips are inserted securely. 

    1. Connect the connector. (Model with mirror heater)
    2. Install the mirror repair.
  7. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  8. For models with Blind Spot Detection/Rear Cross Traffic Alert system, perform operation check of Blind Spot Detection/Rear Cross Traffic Alert system. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE
scientia non olet · About LEMON Manuals