LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Security And Locks - Keyless Entry (Diagnostics)) >> Inspection Mode >> Procedure >> Inspection Mode 1

Inspection Mode 1

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description & trouble part Note
B2771 EEPROM PERFORMANCE Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B2771 EEPROM PERFORMANCE 
B2772 CONTROL MODULE COMMUNICATION STUCK Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC B2772 CONTROL MODULE COMMUNICATION STUCK 
U0073 CONTROL MODULE COMMUNICATION BUS OFF Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC U0073 CONTROL MODULE COMMUNICATION BUS OFF 
U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULE 
U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULE Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC U0422 INVALID DATA RECEIVED FROM BODY CONTROL MODULE 

Diagnostic procedure:

  1. Using the Subaru Select Monitor, perform the clear memory of [Keyless Entry]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
  2. Using the Subaru Select Monitor, read the DTC of [Keyless Entry] to check that there is no DTC displayed. Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC TROUBLE CODE (DTC) 
    NOTE:

    If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step   1 . 

  3. Remove the ignition key from the ignition switch, and insert again.
  4. Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
  5. Using the Subaru Select Monitor, read the DTC of [Keyless Entry] to check that there is no DTC displayed. Ref. to KEYLESS ENTRY (DIAGNOSTICS) >DIAGNOSTIC TROUBLE CODE (DTC) 
    NOTE:

    If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.