Section 63 (Horn System): Horn: Installation
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Install the horn assembly Lo to the horn bracket. (Horn assembly Lo)
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the horn assembly, and connect the connector.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)
- Install the mud guard front. Ref. to EXTERIOR/INTERIOR TRIM>MUD GUARD>INSTALLATION
- Lower the vehicle.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY