Active Test: Operation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select [Combination Meter], and then select [Enter].
On [Select Function] screen, select [Active Test].
On [Active Test] screen, select an item to be checked.
NOTE:
- For detailed operation procedures, refer to "Help" of application.
- If not equipped (depending on destination area or vehicle equipment condition), process will not go on.
- Some items are not displayed according to destination area or vehicle equipment condition.
CAUTION:
After executing the active test, perform the memory clear. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY