LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Anti-Theft System - Security And Locks) >> Keyless Access Control Module >> Removal

Keyless Access Control Module: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the pocket COMPL and the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>REMOVAL>BACK PANEL
  3. Remove the blower motor relay.
    G14612849Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the keyless access control module.
    CAUTION:

    Be careful to keep water and other foreign materials away from the keyless access control module terminals. 

    1. Disconnect the connector.
    2. Release the claws using a flat tip screwdriver or similar tool wrapped with protection tape.
    3. Release the guides and remove the keyless access control module.
      G14612850Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals