Transfer Reduction Driven Gear: Assembly
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Press-fit a new ball bearing (intermediate case side) and a new ball bearing (extension case side) using the ST and a press.
NOTE:
- Apply CVTF to the press-fitting area.
- The axle where a spline is formed is the intermediate case side.
Preparation tool:
ST: BUSHING 1-2 INSTALLER (499277100)
 Courtesy of SUBARU OF AMERICA, INC.
|