LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr690)) >> Secondary Pressure Sensor >> Removal

Secondary Pressure Sensor: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

If water or oil contacts the connector terminal of secondary pressure sensor, replace it with a new part. 

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Disconnect the connector, and using Ko-ken 3/8 12-point 27-mm deep socket (part No. 3305M-27), remove the secondary pressure sensor.
    NOTE:

    Prepare the container for draining of engine oil. 

    G13621964Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the O-ring from the secondary pressure sensor.
scientia non olet · About LEMON Manuals