LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (CVT Transaxle (Tr690)) >> Rear Wheel Speed Sensor >> Removal

Rear Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

If water or oil contacts the connector terminal of rear wheel speed sensor, replace it with a new part. 

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>REMOVAL>CENTER EXHAUST PIPE (REAR)
  3. Remove the center exhaust cover. Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>REMOVAL
    NOTE:

    Remove the center exhaust cover only. 

  4. Disconnect the connector and remove the rear wheel speed sensor.
    G14611114Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals