Front Reduction Drive Gear: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Install the front reduction driven gear shim (rear side).

Courtesy of SUBARU OF AMERICA, INC.

Install the front reduction drive gear and front reduction driven gear as a single unit.

NOTE:

Make sure that the ball bearing (rear side) of the front reduction driven gear is fully in contact with the installation surface (A) of converter case.

Courtesy of SUBARU OF AMERICA, INC.

Install the converter case cover. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CONVERTER CASE COVER>INSTALLATION