LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Ignition System) >> Ignition Coil >> Removal >> RH Side

RH Side

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air cleaner case, Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR CLEANER CASE>REMOVAL
  3. Disconnect the connector from ignition coil.
    NOTE:

    While pressing the spring (a) shown in the figure, slide it in the direction of the arrow with a clip remover. 

    G10318927Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ignition coil.
G13619412Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals