LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> VDC OFF Switch >> Inspection

VDC OFF Switch: Inspection

  1. Remove the VDC OFF switch. Refer to VEHICLE DYNAMICS CONTROL(VDC)>VDC OFF SWITCH>REMOVAL .
  2. Measure the resistance between the VDC OFF switch terminals.

    Preparation tool: 

    Circuit tester

    G10297697Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    5 - 6 Switch OFF 1 MΩ or more
    Switch ON Less than 1 Ω
    NOTE: Replace the VDC OFF switch if the inspection result is not within the standard value.
  3. Install the VDC OFF switch. Refer to VEHICLE DYNAMICS CONTROL(VDC)>VDC OFF SWITCH>REMOVAL .
scientia non olet · About LEMON Manuals