LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System (Service Information) >> Auto Vehicle Hold Switch >> Installation

Auto Vehicle Hold Switch: Installation

  1. Install the auto vehicle hold switch.
  2. Install the parking brake switch. Refer to PARKING BRAKE>PARKING BRAKE SWITCH>INSTALLATION .
  3. Install the console box assembly. Refer to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION>MODEL WITH PARKING BRAKE LEVER .
  4. Connect the ground terminal to battery sensor. Refer to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals