Check Power Seat Switch
Measure resistance between terminals while operating each switch.
| Switch position | Terminal No. | Standard |
|---|---|---|
| Slide forward | 1 and 8 4 and 7 |
Less than 10 Ω |
| Slide rearward | 1 and 7 4 and 8 |
Less than 10 Ω |
| Tilt up | 1 and 3 2 and 4 |
Less than 10 Ω |
| Tilt down | 1 and 2 3 and 4 |
Less than 10 Ω |
| Lifter up | 1 and 6 4 and 9 |
Less than 10 Ω |
| Lifter down | 1 and 9 4 and 6 |
Less than 10 Ω |
| Reclining forward | 1 and 10 4 and 5 |
Less than 10 Ω |
| Reclining rearward | 1 and 5 4 and 10 |
Less than 10 Ω |
Replace the power seat switch if the inspection result is not within the standard value.