LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks (Service Information) >> Keyless Buzzer >> Removal

Keyless Buzzer: Removal

  1. Disconnect the ground cable from battery. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the air cleaner case.
  3. Lift up the vehicle.
  4. Remove the screw and clips, and turn over the mud guard - front LH.
    G12455796Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the keyless buzzer.
    1. Disconnect the connector.
    2. Remove the clip and detach the keyless buzzer.
    G12457036Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals