LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> License Plate Light >> Installation

License Plate Light: Installation

  1. Install the license plate light bulb.
    CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
  2. Install the license plate light.
  3. Install the garnish - trunk. Refer to EXTERIOR/INTERIOR TRIM>TRUNK LID GARNISH>INSTALLATION .

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb)

  4. Install the trim panel - trunk lid.
  5. Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals