Adjustment Value Clear

Perform when replacing stereo camera. (Do not perform when performing stereo camera re-adjustment and inspection)

1. From the work support item list, select «Clear adjustment value».
2. When «Make the following adjustment/inspection. Please push OK if ready.» is displayed, if preparation is ready, select «OK».
3. When «Clear the adjustment value.» is displayed, select «OK».
4. When «Clearing adjustment value... » is displayed, wait until process finishes.
5. When the adjustment value clear is finished correctly, and «Adjustment value cleared OK!» is displayed, select «OK» to finish.
6. Turn the ignition switch to OFF and wait for approx. 5 seconds or more.
   CAUTION: If the ignition switch OFF period is short, the adjustment value clear can not be performed correctly.
7. Next, perform the camera all adjustment mode (replacement/removal). Ref. to EYESIGHT>CAMERA ADJUSTMENT, INSPECTION>PROCEDURE>CAMERA ALL ADJUSTMENT MODE (REPLACEMENT/REMOVAL) .