| Ground short inspection |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>GROUND SHORT INSPECTION . |
Shorted to ground in the communication circuit or control module. |
| Battery short inspection |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>BATTERY SHORT INSPECTION . |
Shorted to battery power supply in the communication circuit or control module. |
| More than 52 Ω and less than 62 Ω |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>MORE THAN 52 Ω AND LESS THAN 62 Ω . |
Combined resistance of end resistance does not have malfunction; short to ground or +B short of the CAN communication circuit is possible, however. |
| 52 Ω or less |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>52 Ω OR LESS . |
Resistance is lower than combined resistance of end resistance. Short to CAN Hi and CAN Lo on the CAN communication circuit is possible. |
| 62 Ω or more |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>62 Ω OR MORE . |
Resistance is higher than combined resistance of end resistance. Open circuit of CAN communication circuit is possible. |
| Related lines more than 52 Ω and less than 62 Ω (TCM system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (TCM SYSTEM) . |
No TCM data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (steering angle sensor system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (STEERING ANGLE SENSOR SYSTEM) . |
No steering angle sensor data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (A/C control panel system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (A/C CONTROL PANEL SYSTEM) . |
No A/C data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (power steering CONTROL MODULE system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (POWER STEERING CONTROL MODULE SYSTEM) . |
No electric power steering data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (combination meter system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (COMBINATION METER SYSTEM) . |
No meter data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (MFD system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (MFD SYSTEM) . |
No MFD data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (airbag system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (AIRBAG CONTROL MODULE SYSTEM) . |
No airbag data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (keyless access system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (KEYLESS ACCESS SYSTEM) . |
No keyless access CONTROL MODULE data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (impact sensor system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (IMPACT SENSOR SYSTEM) . |
Perform inspection when impact sensor malfunction is detected. |
| Related lines more than 52 Ω and less than 62 Ω (DCCD system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (DCCD SYSTEM) . |
No DCCD data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (headlight beam leveler system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (HEADLIGHT BEAM LEVELER SYSTEM) . |
No headlight beam leveler data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (remote engine starter system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (REMOTE ENGINE STARTER SYSTEM) . |
Perform inspection when the remote engine starter does not operate, while the mobile key side operates normally. |
| Related lines more than 52 Ω and less than 62 Ω (BSD/RCTA system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (BSD/RCTA SYSTEM) . |
No BSD/RCTA data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (stereo camera system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (STEREO CAMERA SYSTEM) . |
No stereo camera data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (telematics system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (TELEMATICS SYSTEM) . |
No telematics data is received. Perform inspection when faulty is detected. |
| Related lines more than 52 Ω and less than 62 Ω (RAB system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (RAB SYSTEM) . |
Perform inspection when no RAB data is received, or invalid data is detected. |
| Related lines more than 52 Ω and less than 62 Ω (EyeSight assist monitor system) |
Refer to LAN SYSTEM (DIAGNOSTICS)>CAN COMMUNICATION CIRCUIT CHECK>INSPECTION>RELATED LINES MORE THAN 52 Ω AND LESS THAN 62 Ω (EYESIGHT ASSIST MONITOR SYSTEM) . |
No EyeSight assist monitor data is received. Perform inspection when faulty is detected. |