User Customizing: Operation
- On «Start» display, select «Diagnosis».
- On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
- On «Main Menu» display, select «Each System».
- On «Select System» display, select «Body Control» and then select «Enter».
- On «Select Function» display, select «Customize».NOTE: For detailed operation procedures, refer to "Application help".
List of User Customizing item
Data Initial setting value Customize setting REMARKS Off delay time 30 Seconds OFF Room light off delay time can be selected. 10 Seconds 20 Seconds 30 Seconds Auto Light Sensitivity Adjustment Normal Dull Slow response Normal Standard Sensitive Quick response Very sensitive Fairly quick response Remote Trunk Open/Power Rear Gate Open Function(ON/OFF) ON ON Trunk/power rear gate open function is activated by operating the keyless transmitter. OFF Trunk/power rear gate open function is not activated by operating the keyless transmitter. Lane change signal setting ON ON One-touch blinker control is performed. OFF One-touch blinker control is not performed. Rear wiper auto setting OFF ON Existence of rear wiper linked with reverse operation can be set. OFF TPMS Setting TPMS Set to "ON" for model with TPMS. No TPMS Driver's Door Unlock Setting Select Select When the touch sensor (unlock) on the driver's side is touched, only the driver's door is unlocked. When the touch sensor (unlock) on the passenger's side is touched, all doors are unlocked. ALL When the touch sensor (unlock) on the driver's side is touched, all doors are unlocked. When the touch sensor (unlock) on the passenger's side is touched, all doors are unlocked. Rear Gate Unlock Setting Select Select When the rear gate opener button is pressed, only the rear gate is unlocked. ALL When the rear gate opener button is pressed, all doors are unlocked. Daytime Running Light(DRL) Setting for North America -
((1))High Beam Dimming System Set according to the daytime running light source type. Alternate DRL System Wiper link Auto Light Setup ON ON Wiper interlock auto light function is activated. OFF Wiper interlock auto light function is deactivated. Steering Responsive Fog Lamp Setting -
((1))ON SRF control is performed. OFF SRF control is not performed. Head Lamp Low Beam Specification -
((1))Halogen Set according to the headlight type. HID LED Head Lamp High Beam Specification -
((1))Halogen HID LED High Beam Assist Current Setting -
((1))ON Set to ON for models with HBA. OFF High Beam Assist Function Setting (mirror/EyeSight) -
((1))No HBA Set according to the HBA type. EyeSight HBA mirror HBA Rear defogger operation mode Normal Normal Automatically stops in 15 minutes after the switch is turned to ON. Continuous Repeats activated for 15 minutes and deactivated for 2 minutes until the switch is turned to OFF. Security Alarm Setup ON ON Security alarm (hazard, horn or siren) becomes activated. OFF Security alarm becomes deactivated. Impact Sensor Setup OFF ON Workable when the Impact Sensor Setup is set to "ON". Impact sensor function becomes activated. OFF Impact sensor function becomes deactivated. (Be sure to set to "OFF" for models without sensors.) Alarm delay setup ON After the keyless lock operation, the alarm monitor starts after the following delay time has passed. ON Delay time is 30 seconds. OFF Delay time is 0 seconds. Lockout prevention ON ON key lockout prevention function is activated. (The function does not operate if safety knob is locked by hand.) OFF Key lockout prevention function is deactivated. Impact sensor OFF ON Vehicle is controlled in impact sensor equipped mode. (Make sure to set to "OFF" for models without the impact sensor. When "ON", hazard, horn or siren become activated by keyless lock (alarm monitor start).) OFF Vehicle is controlled in impact sensor non-equipped mode. Buzzer sounding setting ON ON Buzzer operates when lock/unlock is selected by keyless entry system operation. OFF Buzzer does not operate when lock/unlock is selected by keyless entry system operation. Abnormal warning lamp flashing setting ON ON Hazard blinks when lock/unlock is selected by keyless entry system operation. OFF Hazard is not interlocked when lock/unlock is selected by keyless entry system operation. Initial keyless setting - - - Operate - Initial button setting - - - Operate - Passive Alarm OFF ON OFF Door open warning ON ON If a door stays half shut for 20 minutes, room light, map light, and key ring illumination related to doors are turned off to prevent battery run-out. OFF Room light, map light, key illumination and door warning light are not turned off. Dome Light Alarm Setting OFF ON Room light illuminates interlocking with alarm. OFF Room light does not illuminate interlocking with alarm. Welcome Light Off Delay Time (Exiting) 30 Seconds OFF/30 Sec/60 Sec/90 Sec Length of the lighting time can be set. Welcome Light Off Delay Time(Get On) 30 Seconds OFF/30 Sec/60 Sec/90 Sec Length of the lighting time can be set. Keyless Buzzer Volume 5 1 - 7 Buzzer volume can be set. Auto Dimmer Cancel 3 OFF Auto dimmer cancel sensitivity can be set. Dull Less Normal More Most (1) Customization item according to the actual vehicle equipment - When the setting is complete, see «Data monitor» to make sure that the alterations are consistent with the actual equipment on the vehicle.CAUTION:
- the above settings must match the actual vehicle equipment.
- Do not change settings except for setting above while setting the functions.
- Be sure not to change the factory initial setting except when installing a new body integrated unit.
NOTE: For detailed operation procedures, refer to "Application help".