| ABS Sequence Control Mode |
Operate the valve and pump motor continuously to perform the ABS sequence control. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>ABS SEQUENCE CONTROL
. |
| VDC Check Mode |
Operate the valve and pump motor continuously to perform the VDC sequence control. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC SEQUENCE CONTROL
. |
| Brake Lamp Lighting Operation |
Forcibly activate the stop light relay to illuminate the stop light. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>BRAKE LAMP RELAY>OPERATION>BRAKE LIGHT LIGHTING OPERATION MODE BY SUBARU SELECT MONITOR
. |
| VSC (VDC) Centering Mode |
Set the steering angle sensor neutral position, and the lateral G sensor and longitudinal G sensor "0" point. |
Refer to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC Control Module & H/U)>ADJUSTMENT>VDC SENSOR MIDPOINT SETTING MODE
. |