DTC B2352: Radar ASSY B & S Reprogramming Error
When the reproduction of the control unit except the radar sensor is performed, the radar sensor stops.
NOTE:
It is normal if it recovers by turning the ignition switch to OFF → ON after the reproduction is finished.
After normal recovery is completed, perform the clear memory operation. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT (DIAGNOSTICS)>CLEAR MEMORY MODE .
After normal recovery is completed, perform the clear memory operation. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT (DIAGNOSTICS)>CLEAR MEMORY MODE .