LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (CVT Transaxle System (Tr580)) >> Turbine Speed Sensor >> Removal

Turbine Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If water or oil contacts the connector terminal of turbine speed sensor, replace it with a new part.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the front exhaust pipe. Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>REMOVAL .
  3. Disconnect the connector and remove the turbine speed sensor.
    G13950382Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals