LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (CVT Transaxle System (Tr580)) >> Transmission Harness >> Installation

Transmission Harness: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Connect the transmission harness to the control valve body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>CONTROL VALVE BODY>INSTALLATION .
  2. Connect the connector and ground terminal as shown in the figure, and install the clips.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

    G13950450Courtesy of SUBARU OF AMERICA, INC.
    G13950451Courtesy of SUBARU OF AMERICA, INC.
    G13950452Courtesy of SUBARU OF AMERICA, INC.
  3. Install the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>AIR BREATHER HOSE>INSTALLATION .
scientia non olet · About LEMON Manuals