LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (CVT Transaxle System (Tr580)) >> Preparation For Overhaul >> Procedure >> Before Overhaul

Before Overhaul

WARNING: This page is about a different variant/trim than selected.
  1. Remove the torque converter. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>TORQUE CONVERTER>REMOVAL .
  2. Remove the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR580)>AIR BREATHER HOSE>REMOVAL .
  3. Attach the ST.
    NOTE: When attaching the ST to the (a) positions, spacers or similar of 2.0 mm (0.08 in) or more in thickness are necessary.

    Preparation tool: 

    ST: STAND ASSY (18632AA000)

    G13950580Courtesy of SUBARU OF AMERICA, INC.
  4. Place the transmission body.
    NOTE: Prepare a container for draining of oil, because CVTF remaining inside the transmission body may flow out from the input shaft portion.
scientia non olet · About LEMON Manuals