LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Limited XT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Emission Control Systems (Aux. Emission Control Devices) (2.5L)) >> PCV Connector >> Installation

PCV Connector: Installation

WARNING: This page is about a different variant/trim than selected.
  1. By using new O-rings, install the PCV connector, and connect the water hose and PCV hose No. 2.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Install the bracket air conditioner. Ref. to AIR CONDITIONER>COMPRESSOR>INSTALLATION .
  3. Connect the connector and terminal B to the generator.

    Tightening torque: 

    15.5 N.m (1.6 kgf-m, 11.4 ft-lb)

  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. Fill engine coolant. Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>FILLING OF ENGINE COOLANT .
  6. Check refrigerant leaks. Ref. to AIR CONDITIONER>REFRIGERANT LEAK CHECK>INSPECTION .
scientia non olet · About LEMON Manuals