LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Control System (2.4L) (Diagnostics) - Introduction) >> Work Support >> List

Work Support: List

WARNING: This page is about a different variant/trim than selected.
Work Support item Contents Remarks
Simple Roughness Monitor Engine speed and misfiring counter for each cylinder can be displayed.
  • Calculates in range of engine speed (300 rpm to 2000 rpm)
  • Interval of data update is 60 ms at minimum (at 2000 rpm)
High-Grade Roughness Monitor (without harness) Standard deviation, engine speed, etc. can be calculated based on the pulse data of crankshaft position sensor and camshaft position sensor, and the value and graph can also be displayed.
  • Calculates in range of engine speed (300 rpm to 2000 rpm)
  • Interval of data update is 60 ms at minimum (at 2000 rpm)
Entry VIN V.I.N can be registered. Ignition switch ON (engine OFF)
scientia non olet · About LEMON Manuals