LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (2.4L)) >> Engine Mounting >> Installation

Engine Mounting: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the engine mounting onto the engine.

    Tightening torque: 

    35 N.m (3.6 kgf-m, 25.8 ft-lb)

  2. Install the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>INSTALLATION .
scientia non olet · About LEMON Manuals