LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical System (2.4L)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil filler cap.
    G13948896Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the PCV hose assembly No. 1. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>PCV HOSE ASSEMBLY>REPLACEMENT>PCV HOSE ASSEMBLY NO. 1 .
  3. Remove the oil pressure switch. Ref. to LUBRICATION (H4DOTC)>OIL PRESSURE SWITCH>REMOVAL .
  4. Remove the engine oil temperature sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>ENGINE OIL TEMPERATURE SENSOR>REMOVAL .
  5. Remove the oil control solenoid, Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>OIL CONTROL SOLENOID>REMOVAL .
  6. Remove the camshaft position sensor. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>CAMSHAFT POSITION SENSOR>REMOVAL .
scientia non olet · About LEMON Manuals