LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Starting System & Charging System (2.4L)) >> Battery >> Removal

Section 1 (Engine Starting System & Charging System (2.4L)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector from battery sensor. (When the battery is not replaced)
  3. Remove the battery sensor. (When replacing the battery) Ref. to STARTING/CHARGING SYSTEMS (H4DOTC)>BATTERY SENSOR>REMOVAL .
  4. Disconnect the positive terminal of battery.
  5. Remove the battery cable holder.
  6. Remove the battery holder.
    G13949468Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the battery.