LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Electrical >> Gauges >> Driver Monitor (Diagnostics) >> Diagnostics With Phenomenon >> Inspection >> User Information Linkage Does Not Operate Normally

User Information Linkage Does Not Operate Normally

CAUTION: Before performing diagnosis, refer to "CAUTION" in "General Description". Ref. to DRIVER MONITOR (DIAGNOSTICS)>General Description>CAUTION .
NOTE: Before performing diagnosis, check the following items.
  • Move the shift to P position.
  • Set the parking brake to ON.
  • Check that individual persons are registered for Driver Monitoring System.
  • Check that the user information linkage of the cockpit control module is ON.
  1. CHECK COMBINATION METER  .

    Perform the diagnosis for combination meter. Ref. to COMBINATION METER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

    Is the check result OK?

    Yes  : Go to  2 .

    No  : Perform the diagnosis according to the inspection for the combination meter.

  2. CHECK VDC  .

    Perform the diagnosis for VDC. Ref. to BRAKE CONTROL (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

    Is the check result OK?

    Yes  : Go to  3 .

    No  : Perform the diagnosis according to the inspection for VDC.

  3. CHECK COCKPIT CONTROL MODULE  .

    Perform the diagnosis for cockpit control system. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .

    Is the check result OK?

    Yes  : Go to  4 .

    No  : Perform the diagnosis according to the inspection for cockpit control system.

  4. CHECK A/C SYSTEM  .

    Perform the diagnosis for the A/C. Ref. to AIR CONDITIONER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

    Is the check result OK?

    Yes  : Go to  5 .

    No  : Perform the diagnosis according to the inspection for A/C.

  5. CHECK POWER SEAT/REMOTE MIRROR SYSTEM  .

    Perform the diagnosis for the power seat/remote mirror system. Ref. to POWER SEAT MEMORY SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

    Is the check result OK?

    Yes  : Go to  6 .

    No  : Perform the diagnosis according to the inspection for the power seat/remote mirror system.

  6. CHECK DTC  .

    Read the DTC of [Driver Monitor] using the Subaru Select Monitor. Ref. to Driver Monitor (Diagnostics)>Diagnostic Trouble Code (DTC) .

    Are any DTCs displayed? (Current malfunction)

    Yes  : Perform the diagnosis for the displayed DTCs. Ref. to DRIVER MONITOR (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .

    No  : Go to  7 .

  7. CHECK ACTIVE TEST  .

    Using the Subaru Select Monitor, perform [Active Test] of [Driver Monitor]. Ref. to Driver Monitor (Diagnostics)>Active Test .

    Was [Active Test] performed normally?

    Yes  : Check the units, other than the driver monitoring unit, that do not operate normally.

    No  : Go to  8 .

  8. CHECK DTC  .

    Read the DTC of [Driver Monitor] using the Subaru Select Monitor. Ref. to Driver Monitor (Diagnostics)>Diagnostic Trouble Code (DTC) .

    Are any DTCs displayed? (Current malfunction)

    Yes  : Perform the diagnosis for the displayed DTCs. Ref. to DRIVER MONITOR (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .

    No  : Replace the driver monitoring unit. Ref. to INSTRUMENTATION/DRIVER INFO>DRIVER MONITORING UNIT .

scientia non olet · About LEMON Manuals