Check Operation Of SUBARU Rear Vehicle Detection Indicator
- Check the Blind Spot Detection/Rear Cross Traffic Alert system. Ref. to BLIND SPOT DETECTION/REAR CROSS TRAFFIC ALERT (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
- Check the outer mirror assembly.
- Check that the BSD/RCTA indicator of the outer mirror assembly illuminates normally when the BSD/RCTA OFF switch is turned ON while it is installed to the vehicle.
- If it does not illuminate normally, replace the Blind Spot Detection/Rear Cross Traffic Alert system indicator.
- Check that it illuminates normally again. If it does not illuminate normally, replace the outer mirror assembly.