Inspection Mode 2
| DTC | Description and trouble part | Note |
|---|---|---|
| B2604 | Power Seat Memory EEPROM | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Power Seat Memory]. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Power Seat Memory] to check that there is no DTC displayed. Ref. to Power Seat Memory System (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Initialize the power seat system. Ref. to SEATS>POWER SEAT SYSTEM .
- Turn the ignition switch ON → OFF, and wait for 45 seconds or more.
- Turn the ignition switch OFF → ON, and wait for 5 seconds or more.
- Using the Subaru Select Monitor, read the DTC of [Power Seat Memory] to check that there is no DTC displayed. Ref. to Power Seat Memory System (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.