LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Eyesight System >> Camera Adjustment, Inspection >> Procedure >> Washer Adjustment

Washer Adjustment

  1. Remove the cover assembly stereo camera and the camera assembly. Ref. to EYESIGHT>STEREO CAMERA>REMOVAL .
  2. Remove the plate (adjuster), and insert the washer into the vehicle body and plate (adjuster).
    NOTE:
    • Inserting the washer into the vehicle front side makes camera downward  .
    • Inserting the washer into the vehicle rear side makes camera upward  .
    • There is a case that the washer may be inserted at the production line, but it is not abnormal  .

    Preparation items:

    Genuine part: Washer (031105000)

  3. Install the plate (adjuster).

    Tightening torque:

    5.5 ±1 N.m (0.56±0.1 kgf-m, 4.1±0.7 ft-lb)

  4. Install the camera assembly and the cover assembly stereo camera. Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .
  5. Perform the camera all adjustment mode (replacement/removal). Ref. to EYESIGHT>CAMERA ADJUSTMENT, INSPECTION>PROCEDURE>CAMERA ALL ADJUSTMENT MODE (REPLACEMENT/REMOVAL) .
scientia non olet · About LEMON Manuals