LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Eyesight System >> Camera Adjustment, Inspection >> Procedure >> Vehicle Information Registration >> Parameter Check

Parameter Check

NOTE: The parameter data registered in the stereo camera is shown on the display  .
  1. Using the Subaru Select Monitor, select [Confirm on parameter] from the work support item list of [EyeSight]. Ref. to COMMON (DIAG)>WORK SUPPORT .
  2. On the [Confirm on parameter] screen, check that the applied model and option code for the relevant vehicle are displayed, and click the [OK] button.
  3. If the applied model and option code for the relevant vehicle are not displayed on the [Confirm on parameter] screen, perform parameter selection and registration.
NOTE: Note that checking the digit corresponding to option code is not required if "*" or "_" is displayed for option code  .
scientia non olet · About LEMON Manuals